Comfort Management, controller, Lights & Blinds, product

iSMA-B-2D-WD

iSMA-B-2D-WD

DALI lighting configurable controller with Modbus RTU communication. Equipped with Wieland Connectors.

Experience our Light Controller
To minimize time and simplify the commissioning process, the 2D-WD controller is delivered with a built-in application, which supports the most popular light control applications in a single space in a building. The controller is dedicated to controlling two separate DALI light areas with up to 32 DALI ballasts.

2 Special Inputs
Built-in two special inputs are designed to control the light via connected motion sensors or presence detectors. Additionally, special inputs may read the light level intensity from standardized sensors.

4 Digital Inputs and Outputs

The controller is equipped with four dry contact inputs onboard:
2 digital inputs for control of the light by connected monostable or bistable switches
2 digital inputs for occupancy sensors
2 light outputs
The device is equipped with two fuse protected light outputs 230 V AC, with a maximum 4 A load. The outputs can work in two modes defined via DIP switches: DALI or ON/OFF.

24 V DC Power Supply Output
The device is equipped with a 24 V DC output for providing power for motion sensors or presence detectors, which demand an additional supply.

Open Communication
The 2D-WD controller is equipped with RS485 interfaces with open protocol Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
The 2D-WD controller is ready for operation out of the box, you just have to configure the controller using built-in DIP switches.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
RS485 interface
2 separate DALI interfaces – supplying power for up to 16 DALI ballasts
mini USB type B interface
DIP switches for configuration
Status LED indicators
DIN rail mounted

Inputs
2 Special Inputs (SI)
Dry contact input dedicated for motion, presence, or light level intensity sensors

4 Digital Inputs (DI)
Dry contact inputs
2 digital inputs for light control
2 digital inputs for occupancy sensor

Outputs
2 light outputs, max. 4 A
1 power supply output, 24 V DC max. 80 mA

Communication
Modbus RTU/ASCII
DALI

Power Supply
230 V AC

Power supply230 V AC
Digital inputs4
Inputs typeDigital, Special
Outputs typeDigital
Controller typeConfigurable
IP40
Communication protocolDALI, Modbus RTU/ASCII

 

Comfort Management, controller, Lights & Blinds, product

iSMA-B-2D

iSMA-B-2D

DALI lighting configurable controller with Modbus RTU communication.

Experience our Light Controller
To minimize time and simplify the commissioning process, the 2D controller is delivered with a built-in application, which supports the most popular light control applications in a single space in a building. The controller is dedicated to controlling two separate DALI light areas with up to 32 DALI ballasts.

2 Special Inputs
Built-in two special inputs are designed to control the light via connected motion sensors or presence detectors. Additionally, special inputs may read the light level intensity from standardized sensors.

4 Digital Inputs and Outputs

The controller is equipped with four dry contact inputs onboard:
2 digital inputs for control of the light by connected monostable or bistable switches
2 digital inputs for occupancy sensors
2 light outputs
The device is equipped with two fuse-protected light outputs 230 V AC, with a maximum 4 A load. The outputs can work in two modes defined via DIP switches: DALI or ON/OFF.

24 V DC Power Supply Output
The device is equipped with a 24 V DC output for providing power for motion sensors or presence detectors, which demand an additional supply.
Open Communication
The 2D controller is equipped with RS485 interfaces with open protocol Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
The 2D controller is ready for operation out of the box, you just have to configure the controller using built-in DIP switches.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
RS485 interface
2 separate DALI interfaces – supplying power for up to 16 DALI ballasts
mini USB type B interface
DIP switches for configuration
Status LED indicators
DIN rail mounted

Inputs
2 Special Inputs (SI)
Dry contact input dedicated for motion, presence, or light level intensity sensors

4 Digital Inputs (DI)
Dry contact inputs
2 digital inputs for light control
2 digital inputs for occupancy sensor

Outputs
2 light outputs, max. 4 A
1 power supply output, 24 V DC max. 80 mA

Communication
Modbus RTU/ASCII
DALI

Power Supply
230 V AC

Power supply230 V AC
Digital inputs4
Inputs typeDigital, Special
Outputs typeDigital
Controller typeConfigurable
IP40
Communication protocolDALI, Modbus RTU/ASCII

 

Comfort Management, controller, product, Zone Controllers

RAC18-IP

RAC18-IP

Freely programable Room Application Controller RAC18 with 4UI, 4DI, 5DO, 3AO, 2TO, 1xRS485, 1xUSB and 2 fail-safe protected Ethernet ports. Power supply 24 V AC/DC.

Room and Zone Management
The RAC18-IP controller is a multifunctional device providing comfort in a single room or a zone in the building. Onboard 18 I/O’s with Ethernet and serial ports make the controller a versatile system for comfort management, light and blind control, integration and monitoring.

High-end Technology at the Edge
Powerful, IoT ready nano EDGE ENGINE allows unprecedented capabilities for a microcontroller-based device. Take advantage of a time-saving automatic BACnet exposure, real-time programming, and cloud connectivity.

Openness and Reliability
Take advantage of the IP connectivity with open protocols like MQTT, BACnet, and Modbus, and ensure the highest energy efficiency for your building with any supervisory system. Daisy-chained RAC18-IP controllers are protected by a unique fail-safe system on each Ethernet port to provide maximum reliability.

Seamless Programming and Maintenance
Maintain and program your device from anywhere in real-time with a dedicated, free of charge tool. Easy replacement process with system and user data saved on a removable SD card.

4 Universal Inputs
Support for over 20 types of temperature sensors and voltage, resistance, current, and dry contact measurements on each universal input.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with override function saves the real-time values to the non-volatile memory of the controller.

5 Digital Outputs
Digital outputs equipped with normally open 3A relays allow for direct control without additional relays.

3 Analog Outputs
0-10 V DC control with 10 mA accuracy, PWM modes, and a maximum load of up to 20 mA to power external relays makes the output suitable for a variety of scenarios.

2 Triac Outputs
The controller is equipped with two triac outputs that can be used for heating and cooling thermal valve actuators. Outputs can be connected to actuators with a 24 V AC power supply.
Triac outputs can work as typical binary outputs for binary temperature control or with PWM modulation up to 0.5 A load.

Technical Specification

Hardware Specification
Highest performing ARM Cortex-M7
Built-in real-time clock (RTC)
RS485 interface
2 fail-safe protected Ethernet interfaces with a built-in switch
USB type C interface
microSD card
18 I/Os onboard
Status LED indicators
DIN-rail mounted

Inputs
4 Universal Inputs (UI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000 0C, Ni 1000 20C, Ni1000 LG 2.
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input

4 Digital Inputs (DI)
Dry contact inputs
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
5 Digital Outputs (DO)
NO relay output
Resistive load max. 3 A @ 230 V AC/30 V DC
Inductive load max. 75 VA @ 230 V AC/30 W @ 30 V DC

3 Analog Outputs (AO)
0-10 V DC output with maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

2 Triac Outputs (TO)
0.5 A @ 24 V AC for heating and cooling actuators
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
BACnet IP
Modbus RTU/ASCII client
Modbus TCP/IP server
Free software: iC Tool

Power Supply
24 V DC ± 20%
24 V AC ± 20%

Power supply24 V AC, 24 V DC
Analog outputs3
Digital outputs5
Digital inputs4
Universal inputs4
Inputs typeUniversal, Digital
Outputs typeAnalog, Triac, Digital
Controller typeProgrammable
IP20
Communication protocolModbus RTU, BACnet IP

 

Comfort Management, controller, product, Zone Controllers

iSMA-B-FCU-LL

iSMA-B-FCU-LL

Configurable and freely programable powered by Sedona Framewor controller for fan coil units with Modbus or BACnet communication. Equipped with onboard 18 I/Os, adapted to be supplied with 24 V AC voltage and 24 V AC triac control.

Explore Pre-loaded Application for 256 Types of Fan Coil Units
To minimize time and simplify the commissioning process, the FCU controller is delivered with a built-in application, which supports the most popular types of fan coil units. A dedicated DIP switch allows adjusting parameters of the application. Additionally, in the BACnet protocol, the application has a built-in function that allows to automatically bind master and slave controllers in the groups.

Experience the Freedom of Control offered by the Sedona Framework
FCU-LL is a configurable and freely programmable controller with Modbus RTU/ASCII and BACnet MS/TP protocols onboard. The possibility of creating a tailor-made application with the power and flexibility offered by the Sedona Framework makes the controller useful not only for fan coil control. Sedona is an open-source software environment designed to make it easy to build smart, networked, embedded devices, which are well suited for implementing control applications.
Freely programmable controller with a modern programming tool and 18 onboard I/Os is suitable for most types of fan coil units and other comfort management applications.

4 Special Inputs
Take advantage of a special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements, with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with override function saves the real-time values to the non-volatile memory of the controller.

5 Digital Outputs
There are onboard: 3 digital outputs 6 A for fan control, 1 digital output 10 A for electric heater, and 1 digital output 6 A for cooling valve actuator.

3 Analog Outputs
0-10 V DC analog outputs dedicated for a heating actuator, cooling actuator, and fan speed control.

2 Triac Outputs
The FCU-LL controller is equipped with two triac outputs dedicated to heating and cooling thermal valve actuators. Outputs can be connected to actuators with a 24 V AC power supply.
Triac outputs can work as typical binary outputs for binary temperature control or with PWM modulation.

Open Communication
The powerful FCU-LL controller is equipped with two RS485 interfaces with open protocols, BACnet MS/TP and Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
You can prepare your application with the use of a free of charge programming tool or configure the FCU-LL controller using our Quick Start-up manual and built-in DIP switches.

Quality and Reliability Confirmed by Certificates
iSMA CONTROLLI is a long-standing member of the BACnet community. The experience in developing high quality products and the BTL (BACnet Test Laboratory) certification confirm the excellent performance of communication using the BACnet protocol.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
2 RS485 interfaces
mini USB type B interface
Programmable DIP switches
DIP switches for configuration
Status LED indicators
DIN rail mounted
18 I/Os onboard

Inputs
4 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

4 Digital Inputs (DI)
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
5 Digital Outputs (DO)
3 digital outputs 6 A NO for fan control
1 digital output 10 A NO for electric heater and
1 digital output 6 A NO for cooling valve actuator

3 Analog Outputs (AO)
0-10 V DC output maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

2 Triac Outputs (TO)
0.5 A @ 24 V AC for heating and cooling actuators
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & FCU Updater

Power Supply
24 V AC

Power supply24 V AC
Analog outputs3
Digital outputs5
Digital inputs4
Inputs typeDigital, Special
Outputs typeAnalog, Triac, Digital
Controller typeProgrammable|Configurable
IP40
Communication protocolBACnet MS/TP, Modbus RTU/ASCII

 

Comfort Management, controller, product, Zone Controllers

iSMA-B-FCU-HL

iSMA-B-FCU-HL

Configurable and freely programable powered by Sedona Framework controller for fan coil units with Modbus or BACnet communication. Equipped with onboard 18 I/Os, adapted to be supplied with 230 V AC voltage, and 24 V AC triac control.

Explore Pre-loaded Application for 256 Types of Fan Coil Units
To minimize time and simplify the commissioning process, the FCU controller is delivered with a built-in application, which supports the most popular types of fan coil units. A dedicated DIP switch allows for adjusting parameters of the application. Additionally, in the BACnet protocol, the application has a built-in function that allows to automatically bind master and slave controllers in the groups.
Experience the Freedom of Control Offered by the Sedona Framework
FCU-HL is a configurable and freely programmable controller with Modbus RTU/ASCII and BACnet MS/TP protocols onboard. The possibility of creating a tailor-made application with the power and flexibility offered by the Sedona Framework makes the controller useful not only for fan coil control. Sedona is an open-source software environment designed to make it easy to build smart, networked, embedded devices, which are well-suited for implementing control applications.
Freely programmable controller with a modern programming tool and 18 onboard I/Os is suitable for most types of fan coil units and other comfort management applications.

4 Special Inputs
Take advantage of a special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements, with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with overriden function saves the real-time values to the non-volatile memory of the controller.

5 Digital Outputs
There are onboard: 3 digital outputs 6 A for fan control, 1 digital output 10 A for electric heater, and 1 digital output 6 A for cooling valve actuator.

3 Analog Outputs
0-10 V DC analog outputs dedicated for a heating actuator, cooling actuator, and fan speed control.

2 Triac Outputs
The FCU-HL controller is equipped with two triac outputs dedicated to heating and cooling of thermal valve actuators. Outputs can be connected to actuators with a 24 V AC power supply.
Triac outputs can work as typical binary outputs for binary temperature control or with PWM modulation.

Open Communication
The powerful FCU-HL controller is equipped with two RS485 interfaces with open protocols, BACnet MS/TP and Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
You can prepare your application with the use of a free of charge programming tool or configure the FCU-HL controller using our Quick Start-up manual and built-in DIP switches.

Quality and Reliability Confirmed by Certificates
iSMA CONTROLLI is a long-standing member of the BACnet community. The experience in developing high-quality products and the BTL (BACnet Test Laboratory) certification confirm the excellent performance of communication using the BACnet protocol.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
2 RS485 interfaces
mini USB type B interface
Programmable DIP switches
DIP switches for configuration
Status LED indicators
DIN rail mounted
18 I/Os onboard

Inputs
4 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1
2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

4 Digital Inputs (DI)
Dry contact inputs
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
5 Digital Outputs (DO)
3 digital outputs 6 A NO for fan control
1 digital output 10 A NO for electric heater and
1 digital output 6 A NO for cooling valve actuator

3 Analog Outputs (AO)
Output 0-10 V DC maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

2 Triac Outputs (TO)
0.5 A @ 24 V AC for heating and cooling actuators
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & FCU Updater

Power Supply
230 V AC

 
Power supply230 V AC
Analog outputs3
Digital outputs5
Digital inputs4
Inputs typeDigital, Special
Outputs typeAnalog, Triac, Digital
Controller typeProgrammable|Configurable
IP40
Communication protocolBACnet MS/TP, Modbus RTU/ASCII
Comfort Management, controller, product, Zone Controllers

iSMA-B-FCU-HH

iSMA-B-FCU-HH

Configurable and freely programable powered by Sedona Framework controller for fan coil units with Modbus or BACnet communication. Equipped with onboard 18 I/Os, adapted to be supplied with 230 V AC voltage and 230 V AC triac control.

Explore Pre-loaded Application for 256 Types of Fan Coil Units
To minimize time and simplify the commissioning process, the FCU controller is delivered with a built-in application, which supports the most popular types of fan coil units. A dedicated DIP switch allows for adjusting parameters of the application. Additionally, in the BACnet protocol, the application has a built-in function that allows to automatically bind master and slave controllers in the groups.

Experience the Freedom of Control Offered by the Sedona Framework
FCU-HH is a configurable and freely programmable controller with Modbus RTU/ASCII and BACnet MS/TP protocols onboard. The possibility of creating a tailor-made application with the power and flexibility offered by the Sedona Framework makes the controller useful not only for fan coil control. Sedona is an open-source software environment designed to make it easy to build smart, networked, embedded devices, which are well-suited for implementing control applications.
Freely programmable controller with a modern programming tool and 18 onboard I/Os is suitable for most types of fan coil units and other comfort management applications.

4 Special Inputs
Take advantage of a special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements, with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with override function saves the real-time values to the non-volatile memory of the controller.

5 Digital Outputs
There are onboard: 3 digital outputs 6 A for fan control, 1 digital output 10 A for electric heater, and 1 digital output 6 A for cooling valve actuator.

3 Analog Outputs
0-10 V DC analog outputs dedicated for a heating actuator, cooling actuator, and fan speed control.

2 Triac Outputs
The FCU-HH controller is equipped with two triac outputs dedicated to heating and cooling thermal valve actuators. Outputs can be connected to actuators with a 230 V AC power supply.
Triac outputs can work as typical binary outputs for binary temperature control or with PWM modulation.

Open Communication
The powerful FCU-HH controller is equipped with two RS485 interfaces with open protocols, BACnet MS/TP and Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
You can prepare your application with the use of a free of charge programming tool or configure the FCU-HH controller using our Quick Start-up manual and built-in DIP switches.

Quality and Reliability Confirmed by Certificates
iSMA CONTROLLI is a long-standing member of the BACnet community. The experience in developing high-quality products and the BTL (BACnet Test Laboratory) certification confirm the excellent performance of communication using the BACnet protocol.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
2 RS485 interfaces
mini USB type B interface
Programmable DIP switches
DIP switches for configuration
Status LED indicators
DIN rail mounted
18 I/Os onboard

Inputs
4 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

4 Digital Inputs (DI)
Dry contact inputs
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
5 Digital Outputs (DO)
3 digital outputs 6 A NO for fan control
1 digital output 10 A NO for electric heater and
1 digital output 6 A NO for cooling valve actuator

3 Analog Outputs (AO)
Output 0-10 V DC maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

2 Triac Outputs (TO)
0.5 A @ 230 V AC for heating and cooling actuators
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & FCU Updater

Power Supply
230 V AC

Power supply230 V AC
Analog outputs3
Digital outputs5
Digital inputs4
Inputs typeDigital, Special
Outputs typeAnalog, Triac, Digital
Controller typeProgrammable|Configurable
IP40
Communication protocolBACnet MS/TP, Modbus RTU/ASCII

 

Gateway, Metering, product

iSMA-B-MG-IP

iSMA-B-MG-IP

Meter Gateway with built-in M-Bus to M-Bus IP gateway with power supply for up to 60 devices and Modbus TCP/IP to Modbus RTU Gateway.

The Power of Communication
Take advantage of the multiprotocol gateway device to bring your data to the IP network level. With just one compact device, up to 60 M-Bus meters can be integrated into the IP network along with 128 Modbus RTU/ASCII devices.

M-Bus Interface
The M-Bus interface allows for communication and power supply for up to 60 M-Bus meters with a maximum current load of up to 130 mA. This way, up to 60 energy, flow, water, and other types of meters can be powered up and integrated with the M-Bus protocol to a master controller.

M-Bus to M-Bus IP
Bring data from meters to various systems based on the versatility of communication with support for M-Bus TCP/IP and M-Bus UDP/IP protocols.

Modbus TCP/IP to Modbus RTU/ASCII Gateway
Built-in Modbus gateway on the COM1 port enables integration of up to 128 Modbus slave devices to the IP layer.

Two Independent Gateways Operating Simultaneously in One Device
By applying the most popular interfaces for M-Bus and Modbus meters, the device allows for handling up to 180 meters of various types simultaneously.

Simplified Configuration and Commissioning Process
MG-IP allows for seamless configuration with a built-in web server or dedicated free of charge tool. The ability to be powered from a USB port facilitates local testing and a straightforward updating process.

Technical Specification

Communication
M-Bus TCP/IP and UDP/IP to M-Bus gateway
Modbus TCP/IP to Modbus RTU/ASCII gateway
Two independent gateways operating simultaneously in one device
M-Bus interface – up to 60 devices
mini USB type B interface
Onboard status LED indicators
DIN rail mounted
Free software iSMA Configurator
Built-in web server

Power Supply
24 V DC ± 20%
24 V AC ± 20%

Power supply24 V AC, 24 V DC
IP40
Communication protocolM-Bus, Modbus TCP/IP to Modbus RTU/ASCII Gateway, M-Bus IP
Gateway, product, Wireless

iSMA-B-W0202

iSMA-B-W0202

Wireless bridge for Modbus RTU/ASCII with built-in 2 SI and 2 DO.

Wireless Modbus
Eliminate a need to run RS485 cables with the wireless technology offered by the W0202 module. This powerful device acts as a bridge for Modbus RTU/ASCII devices, and with its high power and high-sensitivity wireless transmission technology it provides a reliable communication. The 8-channel radio gives you the ability to build a mesh network with many devices connected.

Onboard Inputs and Outputs
The device is equipped with 2 special inputs and 2 digital outputs that can be controlled with Modbus RTU/ASCII master device.

2 Special Inputs
Take advantage of the special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

2 Digital Outputs
Digital outputs equipped with normally open 3 A relays allow for direct control without additional relays.

Built-in HVAC and Light Applications
Light, cooling, and heating configurable algorithms make the module applicable as a standalone controller.

Power Up with mini USB Port
A mini USB port allows configuring the device without the use of an external power supply (the device is powered through the USB port). This solution gives the user an easy way, using 2 laptops, to carry out the tests within the existing facility.

Made for Retrofits
W0202 has been built to allow an extension of the RS485 bus using a wireless technology wherever the use of network cable is impossible or unprofitable. The use of two W0202 allows for building the wireless bridge for the RS485 by building a wireless remote island (one or more) for devices to communicate via Modbus RTU/ASCII.

Versatile Device in a Compact Housing
A wireless Modbus bridge for serial devices, I/O module, and configurable controller, packed in a compact size with DIN rail mounting, is suitable for even the smallest control panels.

Technical Specification

Inputs
2 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1.
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
2 Digital Outputs (DO)
NO Relay output
Resistive load max. 3 A at 230 V AC / 30 V DC
Inductive load max. 75 VA at 230 V AC / 30 W at 30 V DC

Communication
Modbus RTU/ASCII
Wireless Modbus bridge
mini USB type B interface
Free software iSMA Configurator

Power Supply
24 V DC ± 20%
24 V AC ± 20%

More Information
Power supply24 V AC, 24 V DC
Digital outputs2
Inputs typeSpecial
Outputs typeDigital
Controller typeProgrammable
IP40
Communication protocolModbus RTU/ASCII, Wireless Modbus

 

display, HMI Panels, product, Small & Medium BMS

iSMA-D-PA7C-B1

iSMA-D-PA7C-B1

7” Industrial Panel PC with Android operating system and dedicated iSMA Android Application.

High Quality Touch Display
The 10-point capacitive touchscreen with a 16:9 aspect ratio and 1366×768 resolution offers an exceptional comfort in a small package.

Industrial Grade Housing
This robust aluminium body made of the highest quality materials allows for an excellent user experience and long service life.

Various Installation Options
VESA compatibility offers wall mounting of the panel on any surface as well as mounting into a control cabinet with a dedicated frame.

iSMA Android Application
By increasing a facility’s cost efficiency and simplifying the use of web-based controllers, the iSMA Android Application is the most versatile, multivendor BMS visualization platform on the market. Available with 7, 10, and 15 inch industrial PC panels, it enables unlimited visualization possibilities for any HTML-based controller.

Wireless Capability
The Android panel offers an onboard RJ45 port for an Ethernet cable connection, but can be reached wirelessly with the WiFi card.

Worldwide Operability
The UL certified power adapter offers a wide range of operating voltage (110-240 V AC). Depending on the country, the panel is shipped with an EU, US, or UK power adapter.

Technical Specification

Display
Size 7’’
Aspect ratio 16:9
Resolution 1024×600
Contrast 800:1
Luminance standard 300 nit
Response time 6.5 ms
Active area (mm) 154.81×86.52
Display colors 16.7 M
View angle 75/75/70/75
10-point capacitive touch screen

Installation
Wall mounting – compatible with VESA system
Cabinet door mounting

Interfaces
IP (RJ45)
TF/SD card
2 RS232
1 USB OTG (mini USB)
2 USB 2.0

Power Supply
100-240 V AC (12 V DC), 50/60 Hz
Power consumption: ≤ 33 W
Power standby: ≤ 2 W

 
Power supply110 to 240 V AC
IP65
Display7″

 

display, HMI Panels, product, Small & Medium BMS

iSMA-D-PA10C-B1

iSMA-D-PA10C-B1

10” Industrial Panel PC with Android 7.1 operating system and dedicated iSMA Android Application.

High-quality Touch Display
The 10-point capacitive touchscreen with a 16:9 aspect ratio and 1024×600 resolution offers an exceptional comfort in a small package.

Industrial Grade Housing
This robust aluminium body made of the highest quality materials allows for an excellent user experience and long service life.

Various Installation Options
VESA compatibility offers wall mounting of the panel on any surface as well as mounting into a control cabinet with a dedicated snap-joint installation method.

iSMA Android Application
By increasing a facility’s cost efficiency and simplifying the use of web-based controllers, the iSMA Android Application is the most versatile, multivendor BMS visualization platform on the market. Available with 7, 10, and 15 inch industrial PC panels, it enables unlimited visualization possibilities for any HTML-based controller.

Wireless Capability
The Android panel offers onboard RJ45 port for an Ethernet cable connection, but can be reached wirelessly with the WiFi card.

Worldwide Operability
The UL certified power adapter offers a wide range of operating voltage (110-240 V AC). Depending on the country, the panel is shipped with an EU, US, or UK power adapter.

Technical Specification

Display
Size 10,1’’
Aspect ratio 16:9
Resolution 1366×768
Contrast 800:1
Luminance 300 nit, up to 800 nit
Response time 5 ms
Active area (mm) 222.7×125.2
Display colors 16.7 M
View angle 75/75/75/75
10-point capacitive touch screen

Installation
Wall mounting – compatible with VESA system
Cabinet door mounting

Interfaces
IP (RJ45)
TF/SD card
2 RS232
1 USB OTG
1 USB 2.0

Power Supply
110-240 V AC (12 V DC), 50/60 Hz
Power consumption: ≤ 30 W
Power standby: ≤ 1.5 W

 
Power supply110 to 240 V AC
IP65
Display10″