Modbus I/O, product, remote i/o

SFAR-S-16DI

SFAR-S-16DI

Modbus I/O module with 16 digital inputs, PNP or NPN type.

Modbus I/O Module
SfAR-S-16DI is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications, for example, measuring the working time of devices.

16 Digital Inputs
The module has 16 digital inputs (DI). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. All inputs are isolated from the RS485 and power supply.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
16 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

More Information
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs16

 

Modbus I/O, product, remote i/o

SFAR-S-16DI-M

SFAR-S-16DI-M

Modbus I/O module with 16 digital inputs, PNP or NPN type. Built-in FRAM memory for saving counters.

Modbus I/O Module
SfAR-S-16DI-M is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications, for example, counting pulse signals from flowmeters.

16 Digital Inputs
The module has 16 digital inputs (DI). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and offering a possibility to connect 2 encoders. The SfAR-S-16DI-M module comes with a FRAM memory, allowing a user to save states of counters or timers in case of a power loss. Digital inputs support both PNP and NPN input types. All inputs are isolated from the RS485 and power supply.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows easy connection over Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
16 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
FRAM memory
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs16

 

Modbus I/O, product, remote i/o

SFAR-S-16DO

SFAR-S-16DO

Modbus I/O module with 16 digital outputs, PNP type.

Modbus I/O Module
SfAR-S-16DO gives users a possibility to send multiple signals to multiple devices, for example, to start/stop or alarm reset commands for pumps.

16 Digital Outputs
The module has 16 digital outputs (DO). Digital outputs are PNP transistor outputs, sending voltage signals. All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
16 Digital Outputs (DO)
PNP
30 V DC, 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs16

 

Modbus I/O, product, remote i/o

SFAR-S-16RO

SFAR-S-16RO

Modbus I/O module with 16 relay outputs.

Modbus I/O Module
SfAR-S-16RO is designed to be applied wherever it is necessary to switch to a 3 A load of both AC and DC.

16 Digital Outputs
The module has 16 relay outputs (RO). Relay outputs are normally open (NO) type.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
16 Relay Outputs (RO)
NO type relay
230 V AC/30 V DC max. 3 A

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs16

 

Modbus I/O, product, remote i/o

SFAR-S-6RO

SFAR-S-6RO

Modbus I/O module with 6 NC/NO relay outputs.

Modbus I/O Module
SfAR-S-6RO is designed to be applied wherever it is necessary to switch to 5 A of AC or 10 A of DC.

6 Digital Outputs
The module has 6 relay outputs (RO). Relay outputs are double-throw contact types, offering both normally open (NO) and normally closed (NC) types at the same time.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
6 Relay Outputs (RO)
NO/NC selectable relay type
250 V AC/24 V DC max. 3 A/10 A

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs6

 

Modbus I/O, product, remote i/o

SFAR-S-6TI

SFAR-S-6TI

Modbus I/O module with 6 temperature inputs.

Modbus I/O Module
SfAR-S-6TI is designed to be applied wherever multiple points of temperature measurement are required. Supporting a wide range of temperature sensors and thermocouples makes it a perfect choice for, for example, a chemical or power industry. Thanks to 2 digital outputs and pre-installed logic in the module, it can not only be used as a PLC I/O extension, but also as a standalone application controller.

6 Temperature Inputs & 2 Digital Outputs
The module has 6 temperature inputs (TI) and 2 digital outputs (O). Temperature inputs can work with the most popular resistance temperature sensors and a wide range of thermocouples. Digital outputs are NPN transistor outputs. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
6 Temperature Inputs (TI)
PT100, PT500, PT1000, NI100, KTY81-110 (2 and 3- wire)
Thermocouples J, K, T, N, S, R, B
Resistive inputs 0-8000 Ω
Voltage inputs 0-256 mV, 0-2048 mV

Outputs
2 Digital Outputs (DO)
NPN
30 V DC, 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

 
Outputs typeDigital
Inputs typeUniversal
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs2

 

Modbus I/O, product, remote i/o

SFAR-S-8AO

SFAR-S-8AO

Modbus I/O module with 8 analog outputs.

Modbus I/O Module
SfAR-S-8AO can be used for sending multiple setpoints to devices, for example, for pipelines branching with multiple valves requiring opening percentage setpoints.

8 Analog Outputs
The module has 8 analog outputs (AO). Analog outputs can work as 0-10 V DC, 0-20 mA, or 4-20 mA outputs. All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
8 Analog Outputs (AO)
0-10 V DC
0-20 mA or 4-20 mA
12-bit DAC
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeAnalog
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Analog outputs8

 

Modbus I/O, product, remote i/o

SFAR-S-8AI2DO

SFAR-S-8AI2DO

Modbus I/O module with 8 analog inputs and 2 digital outputs. Power supply 12-24 V DC.

Modbus I/O Module
SfAR-S-8AI2DO is designed to be applied wherever multiple sensors are required. Thanks to 2 digital outputs and pre-installed logic in the module, it can not only be used as a PLC I/O extension, but also as a standalone application controller.

6 Analog Inputs & 2 Digital Outputs
The module has 8 analog inputs (AI) and 2 digital outputs (DO). Analog inputs can work in 7 modes as voltage or current inputs. Digital outputs are NPN transistor outputs. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
8 Analog Inputs (AI)
0-1 V, -1-1 V, 0-10 V, -10-10 V
0-20 mA, 4-20 mA, -20-20 mA
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
2 Digital Outputs (DO)
NPN
30 V DC, 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeAnalog
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Analog inputs8
Digital outputs2

 

Modbus I/O, product, remote i/o

SFAR-S-8DI8DO

SFAR-S-8DI8DO

Modbus I/O module with 8 digital inputs and 8 digital outputs.

Modbus I/O Module
SfAR-S-8DI8DO is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications, for example, measuring a working time of devices.

8 Digital Inputs & 8 Digital Outputs
The module has 8 digital inputs (DI) and 8 digital outputs (DO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. Digital outputs are PNP transistor outputs. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
8 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
8 Digital Outputs (DO)
PNP
30 V DC, 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs8
Digital outputs8

 

Modbus I/O, product, remote i/o

SFAR-S-8DI8RO

SFAR-S-8DI8RO

Modbus I/O module with 8 digital inputs and 8 relay outputs.

Modbus I/O Module
SfAR-S-8DI8RO is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications.

8 Digital Inputs & 8 Digital Outputs
The module has 8 digital inputs (DI) and 8 relay outputs (RO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. Relay outputs are normally open (NO) type. All inputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
8 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
8 Relay Outputs (RO)
NO type relay
230 V AC/30 V DC max. 3 A

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs8
Digital outputs8