Modbus I/O, product, remote i/o

SFAR-S-8TO

SFAR-S-8TO

Modbus I/O module with 8 triac outputs.

Modbus I/O Module
SfAR-S-8TO can be used as a digital output and as an analog PWM output module. It gives users a possibility to control, for example, PWM driven valves.

8 Triac Outputs
The module has 8 triac outputs (TO). All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
8 Triac Outputs (TO)
24-230 V AC max. 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeTriac
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40

 

Modbus I/O, product, remote i/o

SFAR-S-ETH

SFAR-S-ETH

Modbus TCP/IP to Modbus RTU/ASCII gateway with 4 digital inputs and 3 relay outputs.

Modbus I/O Module
SfAR-S-ETH module is a Modbus TCP to Modbus RTU/ASCII gateway, allowing the connection of Modbus RTU/ASCII devices to the Modbus TCP network.

6 Digital Inputs & 2 Digital Outputs
The device has the Ethernet and RS485 interfaces, 4 digital inputs (DI), and 3 relay outputs (RO). Digital inputs can work as fast pulse counters or timers, they support PNP or NPN input types, also offer a possibility to connect an encoder. Relay outputs are normally open (NO) type. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
Communication is performed with the Modbus TCP protocol. The 32-bit ARM core processor provides fast processing and communication. The SfAR-S-ETH offers a unique feature, the device table, which facilitates communication with devices connected to the RS485 port, making it even faster.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
Ethernet interface
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
4 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
3 Relay Outputs (RO)
NO type relay
250 V AC/24 V DC max. 3 A/10 A
Opto-isolated from RS485 and power supply

Communication
Modbus TCP
Modbus RTU/ASCII
Modbus TCP/IP to Modbus RTU/ASCII gateway
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus TCP/IP, Modbus TCP/IP to Modbus RTU/ASCII Gateway
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs4
Digital outputs3

 

Modbus I/O, product, remote i/o

SFAR-1M-4DO

SFAR-1M-4DO

Modbus I/O module with 4 digital outputs, PNP type.

Modbus I/O Module
SfAR-1M-4DO gives users a possibility to send multiple signals to multiple devices, for example, to start/stop or alarm reset commands for pumps.

4 Digital Outputs
The module has 4 digital outputs (DO). Digital outputs are PNP transistor outputs sending voltage signals. All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Outputs
4 Digital Outputs (DO)
PNP
55 V DC, 250 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs4

 

Modbus I/O, product, remote i/o

SFAR-1M-4DI-M

SFAR-1M-4DI-M

Modbus I/O module with 4 digital inputs, PNP or NPN type. Built-in FRAM memory for saving counters.

Modbus I/O Module
SfAR-1M-4DI-M is designed for applications with flowmeters, thanks to its counting feature with saving to FRAM memory. Perfect choice for applications with a need for counting or timing of digital inputs state.

4 Digital Inputs
The module has 4 digital inputs (DI). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. SfAR-S-16DI-M comes with a FRAM memory, allowing a user to save states of counters or timers in case of power loss. Digital inputs support both PNP and NPN input types. All inputs are isolated from the RS485 and power supply.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
4 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
FRAM memory
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs4

 

Modbus I/O, product, remote i/o

SFAR-1M-4DI

SFAR-1M-4DI

Modbus I/O module with 4 digital inputs, PNP or NPN type.

Modbus I/O Module
SfAR-1M-4DI is designed for production lines, with options to connect 2 encoders and count pulses from flowmeters. Perfect choice for applications with a need for counting or timing of digital inputs state.

4 Digital Inputs
The module has 4 digital inputs (DI). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
4 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs4

 

Modbus I/O, product, remote i/o

SFAR-1M-2DI2DO

SFAR-1M-2DI2DO

Modbus I/O module with 2 digital inputs and 2 digital outputs.

Modbus I/O Module
SfAR-1M-2DI2DO is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications, for example, measuring the working time of devices or connecting valves without Modbus support into the Modbus network.

2 Digital Inputs & 2 Digital Outputs
The module has 2 digital inputs (DI) and 2 digital outputs (DO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types.
Digital outputs are PNP transistor outputs sending voltage signals. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the modules is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
2 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
2 Digital Outputs (DO)
PNP
55 V DC max. 250 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs2
Digital outputs2

 

Modbus I/O, product, remote i/o

SFAR-1M-2DI1AO

SFAR-1M-2DI1AO

Modbus I/O module with 2 digital inputs and 1 analog output.

Modbus I/O Module
SfAR-1M-2DI1AO is designed for connecting inverters without Modbus support into the Modbus network.

2 Digital Inputs & 1 Analog Output
The module has 2 digital inputs (DI) and 1 analog output (AO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. The analog output can work as 0-10 V DC, 0-20 mA, or 4-20 mA output. All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
2 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
1 Analog Output (AO)
0-10 V DC
0-20 mA or 4-20 mA
12-bit DAC
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeAnalog
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs2
Analog outputs1

 

Modbus I/O, product, remote i/o

SFAR-1M-1TI1DO

SFAR-1M-1TI1DO

Modbus I/O module with 1 temperature input and 1 digital output.

Modbus I/O Module
SfAR-1M-1TI1DO is designed for controlling ON/OFF heaters following temperature measurement.

1 Temperature Input & 1 Digital Output
The module has 1 temperature input (TI) and 1 digital output (DO). A temperature input can work with the most popular resistance temperature sensors and a wide range of thermocouples. A digital output is a NPN transistor output. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
1 Temperature Input (TI)
PT100, PT500, PT1000, NI100, KTY81-110 (2- and 3-wire)
Thermocouples J, K, T, N, S, R, B
Resistive inputs 0-8000 Ω
Voltage inputs 0-256 mV, 0-2048 mV

Outputs
1 Digital Output (DO)
PNP or NPN
50 V DC, 250 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeUniversal
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs1

 

Modbus I/O, product, remote i/o

SFAR-1M-1AI1DO

SFAR-1M-1AI1DO

Modbus I/O module with 1 analog input and 1 digital output.

Modbus I/O Module
SfAR-1M-1AI1DO is a controller’s I/O extension and as a standalone application controller. It is perfect for controlling lights level according to light measurement and other similar applications.

1 Analog Input & 1 Digital Output
The module has 1 analog input (AI) and 1 digital output (DO). Analog input can work in 7 modes as a voltage or current input. A digital output is a NPN transistor output. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
1 Analog Input (AI)
0-1 V, -1-1 V, 0-10 V or -10-10 V
0-20 mA, 4-20 mA or -20-20 mA
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
1 Digital Output (DO)
PNP or NPN
30 V DC max. 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeAnalog
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Analog inputs1
Digital outputs1