Modbus I/O, product, remote i/o

SFAR-S-16RO

SFAR-S-16RO

Modbus I/O module with 16 relay outputs.

Modbus I/O Module
SfAR-S-16RO is designed to be applied wherever it is necessary to switch to a 3 A load of both AC and DC.

16 Digital Outputs
The module has 16 relay outputs (RO). Relay outputs are normally open (NO) type.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
16 Relay Outputs (RO)
NO type relay
230 V AC/30 V DC max. 3 A

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs16

 

Modbus I/O, product, remote i/o

SFAR-S-6RO

SFAR-S-6RO

Modbus I/O module with 6 NC/NO relay outputs.

Modbus I/O Module
SfAR-S-6RO is designed to be applied wherever it is necessary to switch to 5 A of AC or 10 A of DC.

6 Digital Outputs
The module has 6 relay outputs (RO). Relay outputs are double-throw contact types, offering both normally open (NO) and normally closed (NC) types at the same time.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
6 Relay Outputs (RO)
NO/NC selectable relay type
250 V AC/24 V DC max. 3 A/10 A

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs6

 

Modbus I/O, product, remote i/o

SFAR-S-6TI

SFAR-S-6TI

Modbus I/O module with 6 temperature inputs.

Modbus I/O Module
SfAR-S-6TI is designed to be applied wherever multiple points of temperature measurement are required. Supporting a wide range of temperature sensors and thermocouples makes it a perfect choice for, for example, a chemical or power industry. Thanks to 2 digital outputs and pre-installed logic in the module, it can not only be used as a PLC I/O extension, but also as a standalone application controller.

6 Temperature Inputs & 2 Digital Outputs
The module has 6 temperature inputs (TI) and 2 digital outputs (O). Temperature inputs can work with the most popular resistance temperature sensors and a wide range of thermocouples. Digital outputs are NPN transistor outputs. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
6 Temperature Inputs (TI)
PT100, PT500, PT1000, NI100, KTY81-110 (2 and 3- wire)
Thermocouples J, K, T, N, S, R, B
Resistive inputs 0-8000 Ω
Voltage inputs 0-256 mV, 0-2048 mV

Outputs
2 Digital Outputs (DO)
NPN
30 V DC, 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

 
Outputs typeDigital
Inputs typeUniversal
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs2

 

Modbus I/O, product, remote i/o

SFAR-S-8AO

SFAR-S-8AO

Modbus I/O module with 8 analog outputs.

Modbus I/O Module
SfAR-S-8AO can be used for sending multiple setpoints to devices, for example, for pipelines branching with multiple valves requiring opening percentage setpoints.

8 Analog Outputs
The module has 8 analog outputs (AO). Analog outputs can work as 0-10 V DC, 0-20 mA, or 4-20 mA outputs. All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
8 Analog Outputs (AO)
0-10 V DC
0-20 mA or 4-20 mA
12-bit DAC
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeAnalog
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Analog outputs8

 

Modbus I/O, product, remote i/o

SFAR-S-8AI2DO

SFAR-S-8AI2DO

Modbus I/O module with 8 analog inputs and 2 digital outputs. Power supply 12-24 V DC.

Modbus I/O Module
SfAR-S-8AI2DO is designed to be applied wherever multiple sensors are required. Thanks to 2 digital outputs and pre-installed logic in the module, it can not only be used as a PLC I/O extension, but also as a standalone application controller.

6 Analog Inputs & 2 Digital Outputs
The module has 8 analog inputs (AI) and 2 digital outputs (DO). Analog inputs can work in 7 modes as voltage or current inputs. Digital outputs are NPN transistor outputs. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
8 Analog Inputs (AI)
0-1 V, -1-1 V, 0-10 V, -10-10 V
0-20 mA, 4-20 mA, -20-20 mA
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
2 Digital Outputs (DO)
NPN
30 V DC, 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeAnalog
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Analog inputs8
Digital outputs2

 

Modbus I/O, product, remote i/o

SFAR-S-8DI8DO

SFAR-S-8DI8DO

Modbus I/O module with 8 digital inputs and 8 digital outputs.

Modbus I/O Module
SfAR-S-8DI8DO is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications, for example, measuring a working time of devices.

8 Digital Inputs & 8 Digital Outputs
The module has 8 digital inputs (DI) and 8 digital outputs (DO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. Digital outputs are PNP transistor outputs. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
8 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
8 Digital Outputs (DO)
PNP
30 V DC, 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs8
Digital outputs8

 

Modbus I/O, product, remote i/o

SFAR-S-8DI8RO

SFAR-S-8DI8RO

Modbus I/O module with 8 digital inputs and 8 relay outputs.

Modbus I/O Module
SfAR-S-8DI8RO is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications.

8 Digital Inputs & 8 Digital Outputs
The module has 8 digital inputs (DI) and 8 relay outputs (RO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. Relay outputs are normally open (NO) type. All inputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
8 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
8 Relay Outputs (RO)
NO type relay
230 V AC/30 V DC max. 3 A

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs8
Digital outputs8

 

Modbus I/O, product, remote i/o

SFAR-S-8TO

SFAR-S-8TO

Modbus I/O module with 8 triac outputs.

Modbus I/O Module
SfAR-S-8TO can be used as a digital output and as an analog PWM output module. It gives users a possibility to control, for example, PWM driven valves.

8 Triac Outputs
The module has 8 triac outputs (TO). All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Outputs
8 Triac Outputs (TO)
24-230 V AC max. 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Dedicated TCP/IP to Modbus RTU/ASCII gateway device, SfAR-S-ETH
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeTriac
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40

 

Modbus I/O, product, remote i/o

SFAR-S-ETH

SFAR-S-ETH

Modbus TCP/IP to Modbus RTU/ASCII gateway with 4 digital inputs and 3 relay outputs.

Modbus I/O Module
SfAR-S-ETH module is a Modbus TCP to Modbus RTU/ASCII gateway, allowing the connection of Modbus RTU/ASCII devices to the Modbus TCP network.

6 Digital Inputs & 2 Digital Outputs
The device has the Ethernet and RS485 interfaces, 4 digital inputs (DI), and 3 relay outputs (RO). Digital inputs can work as fast pulse counters or timers, they support PNP or NPN input types, also offer a possibility to connect an encoder. Relay outputs are normally open (NO) type. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
Communication is performed with the Modbus TCP protocol. The 32-bit ARM core processor provides fast processing and communication. The SfAR-S-ETH offers a unique feature, the device table, which facilitates communication with devices connected to the RS485 port, making it even faster.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.
To simplify the installation, the module has been equipped with the Quick Connector system. Using a dedicated SfAR-S-LINK cable allows for connecting up to 10 modules, which provide both RS485 communication and external power supply.

Technical Specification

Hardware Specification
Ethernet interface
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted
Quick Connector system

Inputs
4 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
3 Relay Outputs (RO)
NO type relay
250 V AC/24 V DC max. 3 A/10 A
Opto-isolated from RS485 and power supply

Communication
Modbus TCP
Modbus RTU/ASCII
Modbus TCP/IP to Modbus RTU/ASCII gateway
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus TCP/IP, Modbus TCP/IP to Modbus RTU/ASCII Gateway
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs4
Digital outputs3

 

Modbus I/O, product, remote i/o

SFAR-1M-4DO

SFAR-1M-4DO

Modbus I/O module with 4 digital outputs, PNP type.

Modbus I/O Module
SfAR-1M-4DO gives users a possibility to send multiple signals to multiple devices, for example, to start/stop or alarm reset commands for pumps.

4 Digital Outputs
The module has 4 digital outputs (DO). Digital outputs are PNP transistor outputs sending voltage signals. All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Outputs
4 Digital Outputs (DO)
PNP
55 V DC, 250 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs4