Modbus I/O, product, remote i/o

SFAR-1M-4DI-M

SFAR-1M-4DI-M

Modbus I/O module with 4 digital inputs, PNP or NPN type. Built-in FRAM memory for saving counters.

Modbus I/O Module
SfAR-1M-4DI-M is designed for applications with flowmeters, thanks to its counting feature with saving to FRAM memory. Perfect choice for applications with a need for counting or timing of digital inputs state.

4 Digital Inputs
The module has 4 digital inputs (DI). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. SfAR-S-16DI-M comes with a FRAM memory, allowing a user to save states of counters or timers in case of power loss. Digital inputs support both PNP and NPN input types. All inputs are isolated from the RS485 and power supply.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
4 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
FRAM memory
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs4

 

Modbus I/O, product, remote i/o

SFAR-1M-4DI

SFAR-1M-4DI

Modbus I/O module with 4 digital inputs, PNP or NPN type.

Modbus I/O Module
SfAR-1M-4DI is designed for production lines, with options to connect 2 encoders and count pulses from flowmeters. Perfect choice for applications with a need for counting or timing of digital inputs state.

4 Digital Inputs
The module has 4 digital inputs (DI). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
4 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs4

 

Modbus I/O, product, remote i/o

SFAR-1M-2DI2DO

SFAR-1M-2DI2DO

Modbus I/O module with 2 digital inputs and 2 digital outputs.

Modbus I/O Module
SfAR-1M-2DI2DO is a controller’s I/O extension, which, thanks to its unique features, fits a variety of applications, for example, measuring the working time of devices or connecting valves without Modbus support into the Modbus network.

2 Digital Inputs & 2 Digital Outputs
The module has 2 digital inputs (DI) and 2 digital outputs (DO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types.
Digital outputs are PNP transistor outputs sending voltage signals. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the modules is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
2 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
2 Digital Outputs (DO)
PNP
55 V DC max. 250 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs2
Digital outputs2

 

Modbus I/O, product, remote i/o

SFAR-1M-2DI1AO

SFAR-1M-2DI1AO

Modbus I/O module with 2 digital inputs and 1 analog output.

Modbus I/O Module
SfAR-1M-2DI1AO is designed for connecting inverters without Modbus support into the Modbus network.

2 Digital Inputs & 1 Analog Output
The module has 2 digital inputs (DI) and 1 analog output (AO). Digital inputs can work as fast pulse counters with up to 1000 counts per sec, or timers measuring the ON state and also offering a possibility to connect 2 encoders. Digital inputs support both PNP and NPN input types. The analog output can work as 0-10 V DC, 0-20 mA, or 4-20 mA output. All outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
2 Digital Inputs (DI)
PNP or NPN
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
1 Analog Output (AO)
0-10 V DC
0-20 mA or 4-20 mA
12-bit DAC
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeAnalog
Inputs typeDigital
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital inputs2
Analog outputs1

 

Modbus I/O, product, remote i/o

SFAR-1M-1TI1DO

SFAR-1M-1TI1DO

Modbus I/O module with 1 temperature input and 1 digital output.

Modbus I/O Module
SfAR-1M-1TI1DO is designed for controlling ON/OFF heaters following temperature measurement.

1 Temperature Input & 1 Digital Output
The module has 1 temperature input (TI) and 1 digital output (DO). A temperature input can work with the most popular resistance temperature sensors and a wide range of thermocouples. A digital output is a NPN transistor output. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
1 Temperature Input (TI)
PT100, PT500, PT1000, NI100, KTY81-110 (2- and 3-wire)
Thermocouples J, K, T, N, S, R, B
Resistive inputs 0-8000 Ω
Voltage inputs 0-256 mV, 0-2048 mV

Outputs
1 Digital Output (DO)
PNP or NPN
50 V DC, 250 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeUniversal
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Digital outputs1

 

Modbus I/O, product, remote i/o

SFAR-1M-1AI1DO

SFAR-1M-1AI1DO

Modbus I/O module with 1 analog input and 1 digital output.

Modbus I/O Module
SfAR-1M-1AI1DO is a controller’s I/O extension and as a standalone application controller. It is perfect for controlling lights level according to light measurement and other similar applications.

1 Analog Input & 1 Digital Output
The module has 1 analog input (AI) and 1 digital output (DO). Analog input can work in 7 modes as a voltage or current input. A digital output is a NPN transistor output. All inputs and outputs are isolated from the logic with optoisolators.

Simplified Configuration and Commissioning Process
A built-in RS485 interface allows an easy connection over the Modbus RTU/ASCII protocol. A 32-bit ARM core processor provides fast processing and communication.
The module is equipped with a set of LEDs used to indicate the status of I/Os, power supply, and RS485 communication.
Configuration of the module is carried out with our free software, the SfAR Configurator. A built-in mini USB allows for performing a primary configuration of the unit without an additional power supply.

Technical Specification

Hardware Specification
RS485 interface
mini USB type B interface
Status LED indicators
DIN rail mounted

Inputs
1 Analog Input (AI)
0-1 V, -1-1 V, 0-10 V or -10-10 V
0-20 mA, 4-20 mA or -20-20 mA
Counter and timer functions
Up to 2 encoders support
Opto-isolated from RS485 and power supply

Outputs
1 Digital Output (DO)
PNP or NPN
30 V DC max. 500 mA
Opto-isolated from RS485 and power supply

Communication
Modbus RTU/ASCII
Free software – SfAR Configurator

Power Supply
10-38 V DC ± 20%
10-28 V AC ± 20%

Outputs typeDigital
Inputs typeAnalog
Communication protocolModbus RTU/ASCII
Power supply10 to 28 V AC, 10 to 38 V DC
IP40
Analog inputs1
Digital outputs1

 

Comfort Management, display, product, Wall Panels

TP-W

TP-W

Glass wall panel with touch buttons, and temperature sensor.

Modern and Smart Design
High-end technology packed in just a 14 mm thick glass panel makes it one of the slimmest devices on the market. A user-friendly interface of the front glass panel with interactive icons makes the Touch Point fit perfectly in commercial buildings, hotels, offices, meeting rooms, and other places that need a touch of class.

Intuitive management
Touch Point (TP) panels interact with a user with LEDs indicating a working status of the device.

Ease of Installation and Configuration
Install the Touch Point your way. Suitable for surface and flush mounting, the Touch Point panel offers effortless configuration using network protocols or a built-in USB port, even without an external power supply.

Multiprotocol Interface
The Touch Point is factory-equipped with the two most popular open communication protocols, Modbus and BACnet, which are selectable using a DIP switch.

Ultimate Flexibility
Select the color, sensor type, and display option. The Touch Point is available in a variety of configurations to suit your building perfectly. Available with a set of temperature, CO2, and humidity sensors. The TP version is equipped with a temperature sensor.

Technical Specification

Hardware Specification
Five touch function buttons
RS485 interface
USB type C interface
DIP switches for configuration

Temperature Sensor
Range: 0-50°C
Accuracy: +/- 0.5°C
Resolution: +/- 0.1°C

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Configurator

Power Supply
20-34 V DC
24 V AC ± 20%

Power supply24 V AC, 20 to 34 V DC
Controller typeConfigurable
IP20
Communication protocolModbus RTU/ASCII
MeasureTemperature

 

Comfort Management, display, product, Wall Panels

TP-VAV-HC-DISP-W

TP-VAV-HC-DISP-W

Glass wall panel for VAV Control with TFT display, touch buttons, temperature, humidity and CO2 sensors.

Modern and Smart Design
High-end technology packed in just a 14 mm thick glass panel makes it one of the slimmest devices on the market. A user-friendly interface of the front glass panel with interactive icons makes the Touch Point fit perfectly in commercial buildings, hotels, offices, meeting rooms, and other places that need a touch of class.

Intuitive Management
Touch Point (TP) panels interact with a user with LEDs that indicate the working status of the device. The display shows real-time measurements from sensors.

Ease of Installation and Configuration
Install the Touch Point your way. Suitable for surface and flush mounting, the Touch Point panel offers an effortless configuration using network protocols or a built-in USB port, even without an external power supply.

Multiprotocol Interface
The Touch Point is factory-equipped with the two most popular open communication protocols, Modbus and BACnet, which are selectable using a DIP switch.

Ultimate Flexibility
Select the color and sensor type. The Touch Point for VAV Control is available in a variety of configurations to suit your building perfectly. Available with a set of temperature, CO2, and humidity sensors. The TP-VAV-HC-DISP version is equipped with temperature, humidity, and CO2 sensors.

Technical Specification

Hardware Specification
Built-in TFT display
Three touch function buttons
RS485 interface
USB type C interface
DIP switches for configuration

Temperature Sensor
Range: 0 – 50°C
Accuracy: +/- 0,5°C
Resolution: +/- 0,1°C

Humidity Sensor
Range: 0-100% RH
Accuracy: +/- 2% RH in range 20 – 80% RH
Resolution: +/- 1% RH

CO2 Sensor
Range: 400 – 4000 ppm
Accuracy: +/- 3% of reading
Stability: < 2%

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & iSMA Configurator

Power supply
20 – 34V DC
24V AC ± 20%

Power supply24 V AC, 20 to 34 V DC
Controller typeConfigurable
IP20
Communication protocolBACnet MS/TP, Modbus RTU/ASCII
DisplayTFT
MeasureRelative Humidity, Temperature, CO2

 

Comfort Management, display, product, Wall Panels

TP-VAV-HC-DISP-B

TP-VAV-HC-DISP-B

Glass wall panel for VAV Control with TFT display, touch buttons, temperature, humidity and CO2 sensors.

Modern and Smart Design
High-end technology packed in just a 14 mm thick glass panel makes it one of the slimmest devices on the market. A user-friendly interface of the front glass panel with interactive icons makes the Touch Point fit perfectly in commercial buildings, hotels, offices, meeting rooms, and other places that need a touch of class.

Intuitive Management
Touch Point (TP) panels interact with a user with LEDs that indicate the working status of the device. The display shows real-time measurements from sensors.

Ease of Installation and Configuration
Install the Touch Point your way. Suitable for surface and flush mounting, the Touch Point panel offers an effortless configuration using network protocols or a built-in USB port, even without an external power supply.

Multiprotocol Interface
The Touch Point is factory-equipped with the two most popular open communication protocols, Modbus and BACnet, which are selectable using a DIP switch.

Ultimate Flexibility
Select the color and sensor type. The Touch Point for VAV Control is available in a variety of configurations to suit your building perfectly. Available with a set of temperature, CO2, and humidity sensors. The TP-VAV-HC-DISP version is equipped with temperature, humidity, and CO2 sensors.

Technical Specification

Hardware Specification
Built-in TFT display
Three touch function buttons
RS485 interface
USB type C interface
DIP switches for configuration

Temperature Sensor
Range: 0 – 50°C
Accuracy: +/- 0,5°C
Resolution: +/- 0,1°C

Humidity Sensor
Range: 0-100% RH
Accuracy: +/- 2% RH in range 20 – 80% RH
Resolution: +/- 1% RH

CO2 Sensor
Range: 400 – 4000 ppm
Accuracy: +/- 3% of reading
Stability: < 2%

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & iSMA Configurator

Power supply
20 – 34V DC
24V AC ± 20%

Power supply24 V AC, 20 to 34 V DC
Controller typeConfigurable
IP20
Communication protocolBACnet MS/TP, Modbus RTU/ASCII
DisplayTFT
MeasureRelative Humidity, Temperature, CO2

 

Comfort Management, display, product, Wall Panels

TP-VAV-H-DISP-W

TP-VAV-H-DISP-W

Glass wall panel for VAV Control with TFT display, touch buttons, temperature, and humidity sensors.

Modern and Smart Design
High-end technology packed in just a 14 mm thick glass panel makes it one of the slimmest devices on the market. A user-friendly interface of the front glass panel with interactive icons makes the Touch Point fit perfectly in commercial buildings, hotels, offices, meeting rooms, and other places that need a touch of class.

Intuitive Management
Touch Point (TP) panels interact with a user with LEDs that indicate the working status of the device. The display shows real-time measurements from sensors.

Ease of Installation and Configuration
Install the Touch Point your way. Suitable for surface and flush mounting, the Touch Point panel offers an effortless configuration using network protocols or a built-in USB port, even without an external power supply.

Multiprotocol Interface
The Touch Point is factory-equipped with the two most popular open communication protocols, Modbus and BACnet, which are selectable using a DIP switch.

Ultimate Flexibility
Select the color and sensor type. The Touch Point for VAV Control is available in a variety of configurations to suit your building perfectly. Available with a set of temperature, CO2, and humidity sensors. The TP-VAV-HC-DISP version is equipped with temperature, and humidity sensors.

Technical Specification

Hardware Specification
Built-in TFT display
Three touch function buttons
RS485 interface
USB type C interface
DIP switches for configuration

Temperature Sensor
Range: 0 – 50°C
Accuracy: +/- 0,5°C
Resolution: +/- 0,1°C

Humidity Sensor
Range: 0-100% RH
Accuracy: +/- 2% RH in range 20 – 80% RH
Resolution: +/- 1% RH

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & iSMA Configurator

Power supply
20 – 34V DC
24V AC ± 20%

 
Power supply24 V AC, 20 to 34 V DC
IP20
Communication protocolBACnet MS/TP, Modbus RTU/ASCII
DisplayTFT
MeasureRelative Humidity, Temperature