Comfort Management, controller, product, Zone Controllers

iSMA-B-FCU-LL

iSMA-B-FCU-LL

Configurable and freely programable powered by Sedona Framewor controller for fan coil units with Modbus or BACnet communication. Equipped with onboard 18 I/Os, adapted to be supplied with 24 V AC voltage and 24 V AC triac control.

Explore Pre-loaded Application for 256 Types of Fan Coil Units
To minimize time and simplify the commissioning process, the FCU controller is delivered with a built-in application, which supports the most popular types of fan coil units. A dedicated DIP switch allows adjusting parameters of the application. Additionally, in the BACnet protocol, the application has a built-in function that allows to automatically bind master and slave controllers in the groups.

Experience the Freedom of Control offered by the Sedona Framework
FCU-LL is a configurable and freely programmable controller with Modbus RTU/ASCII and BACnet MS/TP protocols onboard. The possibility of creating a tailor-made application with the power and flexibility offered by the Sedona Framework makes the controller useful not only for fan coil control. Sedona is an open-source software environment designed to make it easy to build smart, networked, embedded devices, which are well suited for implementing control applications.
Freely programmable controller with a modern programming tool and 18 onboard I/Os is suitable for most types of fan coil units and other comfort management applications.

4 Special Inputs
Take advantage of a special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements, with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with override function saves the real-time values to the non-volatile memory of the controller.

5 Digital Outputs
There are onboard: 3 digital outputs 6 A for fan control, 1 digital output 10 A for electric heater, and 1 digital output 6 A for cooling valve actuator.

3 Analog Outputs
0-10 V DC analog outputs dedicated for a heating actuator, cooling actuator, and fan speed control.

2 Triac Outputs
The FCU-LL controller is equipped with two triac outputs dedicated to heating and cooling thermal valve actuators. Outputs can be connected to actuators with a 24 V AC power supply.
Triac outputs can work as typical binary outputs for binary temperature control or with PWM modulation.

Open Communication
The powerful FCU-LL controller is equipped with two RS485 interfaces with open protocols, BACnet MS/TP and Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
You can prepare your application with the use of a free of charge programming tool or configure the FCU-LL controller using our Quick Start-up manual and built-in DIP switches.

Quality and Reliability Confirmed by Certificates
iSMA CONTROLLI is a long-standing member of the BACnet community. The experience in developing high quality products and the BTL (BACnet Test Laboratory) certification confirm the excellent performance of communication using the BACnet protocol.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
2 RS485 interfaces
mini USB type B interface
Programmable DIP switches
DIP switches for configuration
Status LED indicators
DIN rail mounted
18 I/Os onboard

Inputs
4 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

4 Digital Inputs (DI)
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
5 Digital Outputs (DO)
3 digital outputs 6 A NO for fan control
1 digital output 10 A NO for electric heater and
1 digital output 6 A NO for cooling valve actuator

3 Analog Outputs (AO)
0-10 V DC output maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

2 Triac Outputs (TO)
0.5 A @ 24 V AC for heating and cooling actuators
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & FCU Updater

Power Supply
24 V AC

Power supply24 V AC
Analog outputs3
Digital outputs5
Digital inputs4
Inputs typeDigital, Special
Outputs typeAnalog, Triac, Digital
Controller typeProgrammable|Configurable
IP40
Communication protocolBACnet MS/TP, Modbus RTU/ASCII

 

Comfort Management, controller, product, Zone Controllers

iSMA-B-FCU-HL

iSMA-B-FCU-HL

Configurable and freely programable powered by Sedona Framework controller for fan coil units with Modbus or BACnet communication. Equipped with onboard 18 I/Os, adapted to be supplied with 230 V AC voltage, and 24 V AC triac control.

Explore Pre-loaded Application for 256 Types of Fan Coil Units
To minimize time and simplify the commissioning process, the FCU controller is delivered with a built-in application, which supports the most popular types of fan coil units. A dedicated DIP switch allows for adjusting parameters of the application. Additionally, in the BACnet protocol, the application has a built-in function that allows to automatically bind master and slave controllers in the groups.
Experience the Freedom of Control Offered by the Sedona Framework
FCU-HL is a configurable and freely programmable controller with Modbus RTU/ASCII and BACnet MS/TP protocols onboard. The possibility of creating a tailor-made application with the power and flexibility offered by the Sedona Framework makes the controller useful not only for fan coil control. Sedona is an open-source software environment designed to make it easy to build smart, networked, embedded devices, which are well-suited for implementing control applications.
Freely programmable controller with a modern programming tool and 18 onboard I/Os is suitable for most types of fan coil units and other comfort management applications.

4 Special Inputs
Take advantage of a special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements, with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with overriden function saves the real-time values to the non-volatile memory of the controller.

5 Digital Outputs
There are onboard: 3 digital outputs 6 A for fan control, 1 digital output 10 A for electric heater, and 1 digital output 6 A for cooling valve actuator.

3 Analog Outputs
0-10 V DC analog outputs dedicated for a heating actuator, cooling actuator, and fan speed control.

2 Triac Outputs
The FCU-HL controller is equipped with two triac outputs dedicated to heating and cooling of thermal valve actuators. Outputs can be connected to actuators with a 24 V AC power supply.
Triac outputs can work as typical binary outputs for binary temperature control or with PWM modulation.

Open Communication
The powerful FCU-HL controller is equipped with two RS485 interfaces with open protocols, BACnet MS/TP and Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
You can prepare your application with the use of a free of charge programming tool or configure the FCU-HL controller using our Quick Start-up manual and built-in DIP switches.

Quality and Reliability Confirmed by Certificates
iSMA CONTROLLI is a long-standing member of the BACnet community. The experience in developing high-quality products and the BTL (BACnet Test Laboratory) certification confirm the excellent performance of communication using the BACnet protocol.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
2 RS485 interfaces
mini USB type B interface
Programmable DIP switches
DIP switches for configuration
Status LED indicators
DIN rail mounted
18 I/Os onboard

Inputs
4 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1
2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

4 Digital Inputs (DI)
Dry contact inputs
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
5 Digital Outputs (DO)
3 digital outputs 6 A NO for fan control
1 digital output 10 A NO for electric heater and
1 digital output 6 A NO for cooling valve actuator

3 Analog Outputs (AO)
Output 0-10 V DC maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

2 Triac Outputs (TO)
0.5 A @ 24 V AC for heating and cooling actuators
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & FCU Updater

Power Supply
230 V AC

 
Power supply230 V AC
Analog outputs3
Digital outputs5
Digital inputs4
Inputs typeDigital, Special
Outputs typeAnalog, Triac, Digital
Controller typeProgrammable|Configurable
IP40
Communication protocolBACnet MS/TP, Modbus RTU/ASCII
Comfort Management, controller, product, Zone Controllers

iSMA-B-FCU-HH

iSMA-B-FCU-HH

Configurable and freely programable powered by Sedona Framework controller for fan coil units with Modbus or BACnet communication. Equipped with onboard 18 I/Os, adapted to be supplied with 230 V AC voltage and 230 V AC triac control.

Explore Pre-loaded Application for 256 Types of Fan Coil Units
To minimize time and simplify the commissioning process, the FCU controller is delivered with a built-in application, which supports the most popular types of fan coil units. A dedicated DIP switch allows for adjusting parameters of the application. Additionally, in the BACnet protocol, the application has a built-in function that allows to automatically bind master and slave controllers in the groups.

Experience the Freedom of Control Offered by the Sedona Framework
FCU-HH is a configurable and freely programmable controller with Modbus RTU/ASCII and BACnet MS/TP protocols onboard. The possibility of creating a tailor-made application with the power and flexibility offered by the Sedona Framework makes the controller useful not only for fan coil control. Sedona is an open-source software environment designed to make it easy to build smart, networked, embedded devices, which are well-suited for implementing control applications.
Freely programmable controller with a modern programming tool and 18 onboard I/Os is suitable for most types of fan coil units and other comfort management applications.

4 Special Inputs
Take advantage of a special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements, with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with override function saves the real-time values to the non-volatile memory of the controller.

5 Digital Outputs
There are onboard: 3 digital outputs 6 A for fan control, 1 digital output 10 A for electric heater, and 1 digital output 6 A for cooling valve actuator.

3 Analog Outputs
0-10 V DC analog outputs dedicated for a heating actuator, cooling actuator, and fan speed control.

2 Triac Outputs
The FCU-HH controller is equipped with two triac outputs dedicated to heating and cooling thermal valve actuators. Outputs can be connected to actuators with a 230 V AC power supply.
Triac outputs can work as typical binary outputs for binary temperature control or with PWM modulation.

Open Communication
The powerful FCU-HH controller is equipped with two RS485 interfaces with open protocols, BACnet MS/TP and Modbus RTU/ASCII. You can connect up to 128 devices on one bus.

Simplified Configuration and Commissioning Process
You can prepare your application with the use of a free of charge programming tool or configure the FCU-HH controller using our Quick Start-up manual and built-in DIP switches.

Quality and Reliability Confirmed by Certificates
iSMA CONTROLLI is a long-standing member of the BACnet community. The experience in developing high-quality products and the BTL (BACnet Test Laboratory) certification confirm the excellent performance of communication using the BACnet protocol.

Technical Specification

Hardware Specification
ARM Cortex-M4 processor
2 RS485 interfaces
mini USB type B interface
Programmable DIP switches
DIP switches for configuration
Status LED indicators
DIN rail mounted
18 I/Os onboard

Inputs
4 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

4 Digital Inputs (DI)
Dry contact inputs
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
5 Digital Outputs (DO)
3 digital outputs 6 A NO for fan control
1 digital output 10 A NO for electric heater and
1 digital output 6 A NO for cooling valve actuator

3 Analog Outputs (AO)
Output 0-10 V DC maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

2 Triac Outputs (TO)
0.5 A @ 230 V AC for heating and cooling actuators
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
BACnet MS/TP
Modbus RTU/ASCII
Free software iSMA Tool & FCU Updater

Power Supply
230 V AC

Power supply230 V AC
Analog outputs3
Digital outputs5
Digital inputs4
Inputs typeDigital, Special
Outputs typeAnalog, Triac, Digital
Controller typeProgrammable|Configurable
IP40
Communication protocolBACnet MS/TP, Modbus RTU/ASCII

 

Gateway, Metering, product

iSMA-B-MG-IP

iSMA-B-MG-IP

Meter Gateway with built-in M-Bus to M-Bus IP gateway with power supply for up to 60 devices and Modbus TCP/IP to Modbus RTU Gateway.

The Power of Communication
Take advantage of the multiprotocol gateway device to bring your data to the IP network level. With just one compact device, up to 60 M-Bus meters can be integrated into the IP network along with 128 Modbus RTU/ASCII devices.

M-Bus Interface
The M-Bus interface allows for communication and power supply for up to 60 M-Bus meters with a maximum current load of up to 130 mA. This way, up to 60 energy, flow, water, and other types of meters can be powered up and integrated with the M-Bus protocol to a master controller.

M-Bus to M-Bus IP
Bring data from meters to various systems based on the versatility of communication with support for M-Bus TCP/IP and M-Bus UDP/IP protocols.

Modbus TCP/IP to Modbus RTU/ASCII Gateway
Built-in Modbus gateway on the COM1 port enables integration of up to 128 Modbus slave devices to the IP layer.

Two Independent Gateways Operating Simultaneously in One Device
By applying the most popular interfaces for M-Bus and Modbus meters, the device allows for handling up to 180 meters of various types simultaneously.

Simplified Configuration and Commissioning Process
MG-IP allows for seamless configuration with a built-in web server or dedicated free of charge tool. The ability to be powered from a USB port facilitates local testing and a straightforward updating process.

Technical Specification

Communication
M-Bus TCP/IP and UDP/IP to M-Bus gateway
Modbus TCP/IP to Modbus RTU/ASCII gateway
Two independent gateways operating simultaneously in one device
M-Bus interface – up to 60 devices
mini USB type B interface
Onboard status LED indicators
DIN rail mounted
Free software iSMA Configurator
Built-in web server

Power Supply
24 V DC ± 20%
24 V AC ± 20%

Power supply24 V AC, 24 V DC
IP40
Communication protocolM-Bus, Modbus TCP/IP to Modbus RTU/ASCII Gateway, M-Bus IP
Gateway, product, Wireless

iSMA-B-W0202

iSMA-B-W0202

Wireless bridge for Modbus RTU/ASCII with built-in 2 SI and 2 DO.

Wireless Modbus
Eliminate a need to run RS485 cables with the wireless technology offered by the W0202 module. This powerful device acts as a bridge for Modbus RTU/ASCII devices, and with its high power and high-sensitivity wireless transmission technology it provides a reliable communication. The 8-channel radio gives you the ability to build a mesh network with many devices connected.

Onboard Inputs and Outputs
The device is equipped with 2 special inputs and 2 digital outputs that can be controlled with Modbus RTU/ASCII master device.

2 Special Inputs
Take advantage of the special input with support for the most popular types of temperature sensors, ability to read voltage, resistance, current, and dry contact measurements with a fast pulse counter saving up to 100 pulses per second directly to the EEPROM memory.

2 Digital Outputs
Digital outputs equipped with normally open 3 A relays allow for direct control without additional relays.

Built-in HVAC and Light Applications
Light, cooling, and heating configurable algorithms make the module applicable as a standalone controller.

Power Up with mini USB Port
A mini USB port allows configuring the device without the use of an external power supply (the device is powered through the USB port). This solution gives the user an easy way, using 2 laptops, to carry out the tests within the existing facility.

Made for Retrofits
W0202 has been built to allow an extension of the RS485 bus using a wireless technology wherever the use of network cable is impossible or unprofitable. The use of two W0202 allows for building the wireless bridge for the RS485 by building a wireless remote island (one or more) for devices to communicate via Modbus RTU/ASCII.

Versatile Device in a Compact Housing
A wireless Modbus bridge for serial devices, I/O module, and configurable controller, packed in a compact size with DIN rail mounting, is suitable for even the smallest control panels.

Technical Specification

Inputs
2 Special Inputs (SI)
Temperature input: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1.
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
Fast pulse counter up to 100 Hz saved in the EEPROM memory

Outputs
2 Digital Outputs (DO)
NO Relay output
Resistive load max. 3 A at 230 V AC / 30 V DC
Inductive load max. 75 VA at 230 V AC / 30 W at 30 V DC

Communication
Modbus RTU/ASCII
Wireless Modbus bridge
mini USB type B interface
Free software iSMA Configurator

Power Supply
24 V DC ± 20%
24 V AC ± 20%

More Information
Power supply24 V AC, 24 V DC
Digital outputs2
Inputs typeSpecial
Outputs typeDigital
Controller typeProgrammable
IP40
Communication protocolModbus RTU/ASCII, Wireless Modbus

 

display, HMI Panels, product, Small & Medium BMS

iSMA-D-PA7C-B1

iSMA-D-PA7C-B1

7” Industrial Panel PC with Android operating system and dedicated iSMA Android Application.

High Quality Touch Display
The 10-point capacitive touchscreen with a 16:9 aspect ratio and 1366×768 resolution offers an exceptional comfort in a small package.

Industrial Grade Housing
This robust aluminium body made of the highest quality materials allows for an excellent user experience and long service life.

Various Installation Options
VESA compatibility offers wall mounting of the panel on any surface as well as mounting into a control cabinet with a dedicated frame.

iSMA Android Application
By increasing a facility’s cost efficiency and simplifying the use of web-based controllers, the iSMA Android Application is the most versatile, multivendor BMS visualization platform on the market. Available with 7, 10, and 15 inch industrial PC panels, it enables unlimited visualization possibilities for any HTML-based controller.

Wireless Capability
The Android panel offers an onboard RJ45 port for an Ethernet cable connection, but can be reached wirelessly with the WiFi card.

Worldwide Operability
The UL certified power adapter offers a wide range of operating voltage (110-240 V AC). Depending on the country, the panel is shipped with an EU, US, or UK power adapter.

Technical Specification

Display
Size 7’’
Aspect ratio 16:9
Resolution 1024×600
Contrast 800:1
Luminance standard 300 nit
Response time 6.5 ms
Active area (mm) 154.81×86.52
Display colors 16.7 M
View angle 75/75/70/75
10-point capacitive touch screen

Installation
Wall mounting – compatible with VESA system
Cabinet door mounting

Interfaces
IP (RJ45)
TF/SD card
2 RS232
1 USB OTG (mini USB)
2 USB 2.0

Power Supply
100-240 V AC (12 V DC), 50/60 Hz
Power consumption: ≤ 33 W
Power standby: ≤ 2 W

 
Power supply110 to 240 V AC
IP65
Display7″

 

display, HMI Panels, product, Small & Medium BMS

iSMA-D-PA10C-B1

iSMA-D-PA10C-B1

10” Industrial Panel PC with Android 7.1 operating system and dedicated iSMA Android Application.

High-quality Touch Display
The 10-point capacitive touchscreen with a 16:9 aspect ratio and 1024×600 resolution offers an exceptional comfort in a small package.

Industrial Grade Housing
This robust aluminium body made of the highest quality materials allows for an excellent user experience and long service life.

Various Installation Options
VESA compatibility offers wall mounting of the panel on any surface as well as mounting into a control cabinet with a dedicated snap-joint installation method.

iSMA Android Application
By increasing a facility’s cost efficiency and simplifying the use of web-based controllers, the iSMA Android Application is the most versatile, multivendor BMS visualization platform on the market. Available with 7, 10, and 15 inch industrial PC panels, it enables unlimited visualization possibilities for any HTML-based controller.

Wireless Capability
The Android panel offers onboard RJ45 port for an Ethernet cable connection, but can be reached wirelessly with the WiFi card.

Worldwide Operability
The UL certified power adapter offers a wide range of operating voltage (110-240 V AC). Depending on the country, the panel is shipped with an EU, US, or UK power adapter.

Technical Specification

Display
Size 10,1’’
Aspect ratio 16:9
Resolution 1366×768
Contrast 800:1
Luminance 300 nit, up to 800 nit
Response time 5 ms
Active area (mm) 222.7×125.2
Display colors 16.7 M
View angle 75/75/75/75
10-point capacitive touch screen

Installation
Wall mounting – compatible with VESA system
Cabinet door mounting

Interfaces
IP (RJ45)
TF/SD card
2 RS232
1 USB OTG
1 USB 2.0

Power Supply
110-240 V AC (12 V DC), 50/60 Hz
Power consumption: ≤ 30 W
Power standby: ≤ 1.5 W

 
Power supply110 to 240 V AC
IP65
Display10″

 

display, HMI Panels, product, Small & Medium BMS

iSMA-D-PA15C-B1

iSMA-D-PA15C-B1

15” Industrial Panel PC with Android 7.1 operating system and dedicated iSMA Android Application

High-quality Touch Display
The 10-point capacitive touchscreen with a 16:9 aspect ratio and 1920×1080 resolution offers an exceptional comfort in a small package.

Industrial Grade Housing
This robust aluminium body made of the highest quality materials allows for an excellent user experience and long service life.

Various Installation Options
VESA compatibility offers wall mounting of the panel on any surface as well as mounting into a control cabinet with a dedicated snap-joint installation method.

iSMA Android Application
By increasing a facility’s cost efficiency and simplifying the use of web-based controllers, the iSMA Android Application is the most versatile, multivendor BMS visualization platform on the market. Available with 7, 10, and 15 inch industrial PC panels, it enables an unlimited visualization possibilities for any HTML-based controller.

Wireless Capability
The Android panel offers an onboard RJ45 port for an Ethernet cable connection, but can be reached wirelessly with the WiFi card.

Worldwide Operability
The UL certified power adapter offers a wide range of operating voltage (110-240 V AC). Depending on the country, the panel is shipped with an EU, US, or UK power adapter.

Technical Specification

Display
Size 15,6’’
Aspect ratio 16:9
Resolution 1920×1080
Contrast 1000:1
Luminance 300 nit, up to 1000 nit
Response time 5 ms
Active Area (mm) 344.2×193.6
Display colors 16.7 M
View angle 89/89/89/89
10-point capacitive touch screen

Installation
Wall mounting – compatible with VESA system
Cabinet door mounting

Interfaces
IP (RJ45)
TF/SD card
2 RS232
1 USB OTG
1 USB 2.0

Power Supply
110-240 V AC (12 V DC), 50/60 Hz
Power consumption: ≤ 30 W
Power standby: ≤ 1.5 W

 
Power supply110 to 240 V AC
IP65
Display15″

 

display, HMI Panels, product, Small & Medium BMS

iSMA-D-PD10C-B1

iSMA-D-PD10C-B1

iSMA-D-PD10C-B1 is 10.1” Industrial Panel LCD designed to simplify the use of iSMA-B-MAC36NL controller by leveraging the HDMI output.

Direct Integration with the Controller

Thanks to a simple connectivity by USB cable for touch and HDMI cable for display, the iSMA-D-PD10 LCD panel makes a perfect, cost-effective extension of the iSMA-B-MAC36NL controller.

High-quality Touch Display
The 10-point capacitive touchscreen with a 16:9 aspect ratio and 1366×768 resolution offers an exceptional comfort in a small package.

Industrial grade housing
This robust aluminium body made of the highest quality materials allows for an excellent user experience and long service life.

Various Installation Options
VESA compatibility offers wall mounting of the panel on any surface as well as mounting into a control cabinet with a dedicated snap-joint installation method.

Worldwide Operability
The UL certified power adapter offers a wide range of operating voltage (110-240 V AC). Depending on the country, the panel is shipped with an EU, US, or UK power adapter.

Technical Specification

Display
Size 10,1’’
Aspect ratio 16:9
Resolution: for iSMA-B-MAC36NL 1280×720; for panel 1366×768
Contrast 800:1
Luminance 300 nit, up to 800 nit
Response time 5 ms
Active area (mm) 222.7×125.2
Display colors 16.7 M
View angle 75/75/75/75
10-point capacitive touch screen

Installation
Wall mounting – compatible with VESA system
Cabinet door mounting

Interfaces
HDMI
VGA
DVI
RJ45-USB for touch input

Power supply
110-240 V AC (12-24 V DC), 50/60 Hz
Power consumption: ≤ 30 W
Power standby: ≤ 1.5 W

Power supply110 to 240 V AC
IP65
Display10″

 

controller, Hybrid IoT Controllers, product, Small & Medium BMS

iSMA-B-MAC36NL

iSMA-B-MAC36NL

Hybrid IoT Controller powered by Niagara Framework is a scalable solution for small and medium-sized buildings for comprehensive control, process visualization and energy management. Equipped with Linux, 36 I/O, 2 Ethernet ports, 2 USB ports, HDMI and 2 RS485 communication port.

Hybrid IoT Controller Powered by Niagara Framework
Just one powerful controller with 36 I/Os onboard for monitoring and control, trends, alarms, HTML5 visualization, which integrates all protocols that exist in commercial buildings.
All-in-one Integration
Achieve maximum efficiency and comfort of the building, while reducing the energy cost to a minimum, thanks to connecting HVAC, metering, lighting, comfort, and energy management into one common platform.
Visualization Efficiency
Access and control HTML5 visualization locally, with onboard HDMI output and 2 USB ports with touch and mouse support, or globally thanks to IP connectivity.
Expandable
36 onboard inputs and outputs can be easily expanded by series of I/O modules by IP or RS485 interface, enabling expanding the controller capabilities at the same time of installation or in the future.

DDC Control
Take advantage of the 36 onboard I/Os managable within the Niagara Framework.

16 Universal Inputs
Support for over 20 types of temperature sensors and voltage, resistance, current, and dry contact measurements on each universal input.

4 Digital Inputs
Dry contact inputs – made for monitoring. 100 Hz fast pulse counter with override function saves the real-time values to the SD card.

8 Digital Outputs
Digital outputs equipped with normally open 3 A relays allow for direct control without additional relays.

8 Analog Outputs
0-10 V DC control with 10 mA accuracy, PWM modes, and a maximum load of up to 20 mA to power external relays makes the output suitable for a variety of scenarios.

Scalable
It is all about the scale! Implement BMS into the small and medium-sized buildings that thought they can’t afford the BMS.

Complex Solution…
Provide control, data logging, alarming, scheduling, integration, and visualization. Choose whether you control your building remotely through the browser using a secured connection, or locally with a screen connected directly to the controller through the HDMI port.

..to Make Your Building Smart!
Bring your building or a group of buildings to the cloud by one of the chosen protocols like MQTT to maximize the efficiency of the buildings, monitor and optimize the operation of the building to minimize the maintenance cost.

Niagara Framework
Versions 4.4 and up

Licensing
Base license: 100 points to 1250 points
Update packages: 50 points to 1250 points

Technical Specification

Hardware Specification
1 GHz dual core CPU
1 GB DDR3 RAM
Opto-isolated RS485 interface
2 independent Ethernet interfaces
2 USB 2.0 interfaces
HDMI 1.4 interface
FRAM memory for Data Recovery Service
iSMA OS Linux distribution
Industrial grade 4 GB microSD card
Status LED indicators
DIN rail mounted
36 I/Os onboard
Two programmable DIP switches
Two programmable rotary switches

Inputs
16 Universal Inputs (UI)
Temperature input 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000 0C, Ni 1000 20C, Ni1000 LG 2
Resistive input 0-1000 kΩ
Voltage input 0-10 V DC
Current input 0-20 mA
Dry contact input
+W9

4 Digital Inputs (DI)
Dry contact inputs
Fast pulse counter up to 100 Hz saved to SD card

Outputs
8 Digital Outputs (DO)
NO relay output
Resistive load max. 3 A at 230 V AC / 30 V DC
Inductive load max. 75 VA at 230 V AC / 30 W at 30 V DC

8 Analog Outputs (AO)
0-10 V DC output with maximum load up to 20 mA
PWM: 0.01 Hz, 0.1 Hz, 1 Hz, 10 Hz, 100 Hz

Communication
Modbus RTU/ASCII
Modbus TCP/IP
BACnet MS/TP
BACnet IP
oBiX
SNMP
KNX IP
M-Bus IP
LON IP
TLS/SSL encryption
Built-in HTTP web server
MQTT
Over 200 available drivers for proprietary protocols

Power Supply
24 V DC
24 V AC

Power supply24 V AC, 24 V DC
Analog outputs8
Digital outputs8
Digital inputs4
Universal inputs16
Inputs typeUniversal, Digital
Outputs typeAnalog, Digital
Controller typeProgrammable
IP30
Communication protocolBACnet MS/TP, BACnet IP, KNX, Modbus RTU/ASCII, Modbus TCP/IP, M-Bus IP, LON, MQTT, SNMP, OPC, oBIX